pH Increaser for Swimming Pool
Zyax Pool Maxx pH UP
at checkout on our website.
- Reduces eye irritation from pool water
- Guards against corrosion
- Preserves pool and equipment
Pool Maxx pH Up is a pH increaser for pools that protects equipment & surface for optimal chlorine effectiveness. It helps to minimize the consumption of chlorine, flocculants, and other pool maintenance solutions by maintaining the optimum pH level of water. Pool Maxx pH Down quickly restores the pH and stabilizes it.
* Swipe left to view
| To Increase pH | |||
|---|---|---|---|
| Capacity (In Litres) | Inial pH | pH Down | Final pH |
| 100000 | 6.6 | 1700 gm | 7.6 |
| 6.8 | 1360 gm | 7.6 | |
| 7.0 | 1020 gm | 7.6 | |
| 7.2 | 907 gm | 7.6 | |
Dosage:
Never add more than 50 % of this product at one time of the above-recommended dosages. If the pH is below 7.2, add this product to raise the pH to an acceptable range using the dosage chart above.
Recommended range 7.4 - 7.6
Information
Use
Zyax Pool Maxx pH Up is used for raising Low pH levels of pool water to protect equipment and surface for optimal chlorine / pool maxx effectiveness and improve swimmer comfort by preventing eye irritation.
Direction
Test water before using this product. Broadcast in the deepest area while pool is not in use and pump is running.
For Better Results
Allow the pool to circulate for hours then retest PH. Add more product if needed. Brush any undissolved clumps off surface of pool to avoid surface damage.
Storage and Disposal
Keep this product dry in original tightly closed container when not in use. Store in a cool, dry, well ventilated area. Keep out of reach of children and pets. Do not reuse container. Rinse empty container thoroughly before discarding in trash or recycling
Hazard Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS. CAUTION: EYE AND SKIN IRRITANT. HARMFUL IF SWALLOWED. Contains sodium carbonate anhy. Avoid contact with eyes, skin or clothing. Wear goggles or safety glasses and rubber gloves when handling this product. May be irritating to nose and throat. Avoid breathing dust. Wash hands thoroughly after use. If product gets on clothing, remove and wash before reuse. Do not mix with other chemicals.
store in well-ventilated cool and dry place, away from direct sunlight.
FAQs
What is the precise dosage amount that should be added to the pool?
Never add more than 50 % of this product at one time of the above-recommended dosages. The product should be added according to the dosage chart above to achieve a suitable pH range when the measurement is less than 7.2.
What are the minimum and maximum pH levels that should be maintained?
The optimal measurement for pH concentration exists between 7.4 and 7.6.
What is the ideal frequency for testing the pH levels of my pool to ensure optimal water quality?
Regular pool pH assessment should occur at a minimum of once per week. Testing frequency needs to increase under conditions of heavy pool utilization and after rainfall, but weekly checks serve as the minimum requirement for pool water monitoring.
What is the reaction time for pH Up, and how quickly can we expect to see its effects?
Users need to wait at least thirty minutes after implementing a pH increaser before entering the pool area. The waiting period enables the chemical to dissolve and spread throughout the water properly to achieve safe pool conditions.
